How to convert a Raymarine ARCHIVE.FSH file to GPX

Updated November 22, 2026 · By WaypointRescue

Short answer: copy ARCHIVE.FSH from the plotter’s card to a computer, open it with a converter, and save the result as GPX. You can do that in a browser with WaypointRescue (nothing to install, the file is not uploaded), by loading the archive on another Raymarine display that runs LightHouse II and exporting it again, or with one of the open-source programs on GitHub if you use a terminal. Then import the GPX into your new plotter or app.

What ARCHIVE.FSH is

Older Raymarine chartplotters, the C-Series and E-Series Classic (C80, C120, E80, E120 and their siblings), the A-Series and the C-Series and E-Series Widescreen, save your waypoints, routes and tracks to a memory card as a single file named ARCHIVE.FSH. It is not text. It is a copy of the plotter’s internal flash storage: it starts with the words RL90 FLASH FILE, and the data sits in 64 KB sectors that each start with RAYFLOB1. Raymarine never published the format. What is known about it was worked out by boat owners and written up on the OpenStreetMap wiki.

Newer plotters, from any brand, exchange data as GPX, an open text format. None of them reads ARCHIVE.FSH directly. That is why the file has to be converted once, when you change plotter.

Where the file is

  1. Save your data to the card on the old plotter, if you have not done it yet. Use the plotter’s function for archiving or saving waypoints, routes and tracks to a card. The key presses differ by model, so follow your plotter’s handbook. Save all three kinds of data.
  2. Take the card out and put it in a card reader. Classic C-Series and E-Series use CompactFlash cards; later models use microSD.
  3. Find ARCHIVE.FSH in the top folder of the card. In the archives we have seen it is exactly 1 MB, whatever the amount of data.
  4. Copy it to your computer and work from the copy. Old cards fail, and this may be the only copy of your waypoints outside the plotter.

If the card is a chart card, do not delete or move anything else on it.

Convert it in your browser

  1. Open WaypointRescue and drop ARCHIVE.FSH on the page, or choose it with the button.
  2. Check the preview: the number of waypoints, routes, tracks and track points, a table of the first waypoints and a drawing of everything. If the names and the shape of the coast look like yours, the file was read correctly.
  3. Download the GPX. A CSV of the waypoints and a KML are there too.

The file is read on your device and is not uploaded. It is not modified either. The preview is complete and free; the free downloads hold the first 25 waypoints, 1 route and 1 track, enough to try the import on your new plotter, and a one-time $9 unlocks everything.

What is inside, and what comes out

Do it in your browser

Add your ARCHIVE.FSH. WaypointRescue shows the waypoints, routes and tracks it holds and gives you a GPX, a CSV and a KML. Nothing is uploaded and nothing is installed. The preview and the first 25 waypoints, 1 route and 1 track are free, $9 once for everything.

Convert my ARCHIVE.FSH

Import the GPX into your new plotter or app

Every current plotter and navigation app has an “import GPX” function. The names of the menus change with each brand and software version, so use the manual of your device for the exact steps. In general:

After importing, look at a few waypoints you know well and check that they are where they should be. Devices have their own limits on name length, on how many waypoints they hold and on which symbols they know, and they apply them when importing. Do not navigate on converted data until you have checked it against your charts.

When Raymarine’s own method is the better choice

If you have, or can borrow, a Raymarine display running LightHouse II, it can load an ARCHIVE.FSH and export the data again in the current format. That is the manufacturer’s route, and it is the natural one if your new plotter is that display. Raymarine has also offered an FSH-to-GPX converter program for Windows. Both are worth a try if you have the hardware; ask Raymarine support or its forum for the current instructions.

Open-source tools, if you use a terminal

They are free and you can read their code (all three are GPL). WaypointRescue is a separate implementation written from the format description and checked against real archives and against GPX files exported by Raymarine software from the same data.

FAQ

Is there a waypoint limit?

Not in WaypointRescue. Real archives with 1,061 and 1,010 waypoints convert completely.

Does it work on a Mac?

Yes. It is a web page, so it runs on Mac, Windows and Linux.

Do my tracks keep their times?

No converter can give them: ARCHIVE.FSH stores no time for track points. Waypoints keep the date and time they were saved.

Is anything uploaded?

No. The archive is read in your browser and the GPX is built there.

Is this from Raymarine?

No. WaypointRescue is an independent tool. Not affiliated with Raymarine.

Convert my ARCHIVE.FSH