My old Raymarine plotter saved everything in an ARCHIVE.FSH. How do I get my waypoints out?
You are replacing a C-Series or E-Series Classic with a new plotter or an app, and 15 years of waypoints, routes and tracks sit on a card in a file that nothing opens. Drop your ARCHIVE.FSH here: WaypointRescue reads it right in your browser and gives you a GPX file with your waypoints, routes and tracks, ready to import into Garmin, Simrad, B&G, Raymarine Axiom, Navionics or OpenCPN.
- Nothing uploaded: the file stays on your device
- Nothing to install or compile, on Mac, Windows or Linux
- Your ARCHIVE.FSH is only read, never changed
At a glance
What WaypointRescue does and doesn’t do
- Works withThe
ARCHIVE.FSHfile (it starts with “RL90 FLASH FILE”) that Raymarine C-Series and E-Series Classic (C80, C120, E80, E120), A-Series and C/E-Series Widescreen plotters save to a CompactFlash or microSD card. - ProducesOne GPX 1.1 file per archive with your waypoints, routes and tracks, plus a CSV of the waypoints and a KML.
- KeepsNames, comments, positions, the date each waypoint was saved, groups, 16 known symbols, depth and water temperature where stored, the order of route points, and the gaps in tracks.
- Runs onAny browser, on Windows, Mac or Linux. Nothing to install, nothing to compile, no command line.
- FreeThe complete preview and counts of your file. The downloads hold the first 25 waypoints, 1 route and 1 track.
- Full$9 one-time. Every waypoint, route and track, any number of archives. No subscription.
- PrivacyYour files never leave your device. No map service is called.
- Doesn’tRead
.rwffiles, chart cards or sonar logs, or the GPX of LightHouse displays (already GPX). It doesn’t write ARCHIVE.FSH. Track points have no times, because the file stores none. Symbols outside the 16 known ones and track colors are not carried over. Not tested above 45° latitude. Not affiliated with Raymarine.
- Garmin
- Simrad
- B&G
- Raymarine Axiom
- Navionics Boating
- OpenCPN
of data converted: waypoints, routes and tracks, with no waypoint cap
What is in the fileof your archive sent to any server
How it workswaypoints, 1 route and 1 track free, with the full preview of your file
Try itonce, everything, no subscription
PricingThe problem
Years of waypoints, locked in a file nothing opens.
“I am replacing my old Raymarine E80 with a new plotter. All my waypoints, routes and tracks are in ARCHIVE.FSH on the CF card. How do I convert it to GPX?”
A format only the old plotter reads
ARCHIVE.FSH is a binary flash image. A new Garmin, Simrad, B&G or Axiom plotter does not import it, and neither do Navionics or OpenCPN. They import GPX.
The official route needs more hardware
Raymarine’s way is to load the archive on another display running LightHouse II and export it again, or to run its converter program on a Windows PC.
The free tools need a terminal
The open-source converters on GitHub are a C program you compile, an older Python script and a Windows app. Fine if you are at home on a command line.
How it works
Three steps. No second display, no compiler, no upload.
- Step 1
Take the card to a computer
Save your data to the card on the old plotter if you have not yet, then put the CompactFlash or microSD card in a card reader. The file is
ARCHIVE.FSH, in the top folder. Copy it to your computer. Where to find it - Step 2
Drop ARCHIVE.FSH on this page
It is read in your browser. You see how many waypoints, routes and tracks it holds, a table of the waypoints and a drawing of everything. Nothing is uploaded.
- Step 3
Download the GPX and import it
Copy the GPX to your new plotter’s card or open it in your app, and use “import GPX”. Importing into a plotter or app
Convert
Add your ARCHIVE.FSH
Everything runs on this page. Your waypoints never leave your device.
Drop ARCHIVE.FSH here
One file or several. The file is only read: it is not changed and not uploaded.
Free: full preview and counts; the downloads hold the first 25 waypoints, 1 route and 1 track. Unlock everything for $9.
Standard GPX
Written the way plotters and apps expect.
No private format and no account. A plain GPX 1.1 file you can open in a text editor, keep as a backup and import anywhere.
- WaypointsName, latitude and longitude as stored (seven decimals), the date saved, comment, symbol name and group.
- RoutesEach route with its name and its points in the order you sail them, including a point the route passes twice.
- TracksEach track with its name, split into segments where the recording paused, with depth and water temperature when the plotter logged them.
<wpt lat="41.4869189" lon="-71.4045043">
<time>2014-08-12T10:22:33Z</time>
<name>Anchorage N</name>
<sym>Anchor</sym><type>Home waters</type>
</wpt>
<rte><name>Home to inlet</name>
<rtept lat="41.4521" lon="-71.3902">…</rtept>
</rte>
<trk><name>Summer cruise</name>
<trkseg><trkpt lat="41.4467" lon="-71.3855">…Name, Latitude, Longitude, Group, Symbol, Comment, Time (UTC), Depth (m), Water temp (C)
Anchorage N, 41.4869189, -71.4045043, Home waters, Anchor, , 2014-08-12T10:22:33Z, 4.2, 21.6What you get
The ARCHIVE.FSH converter people ask for, as a web page.
Until now this job meant a second Raymarine display, a Windows program or a tool from GitHub. WaypointRescue does it on the computer you already have.
Waypoints with their details
Name, position, date saved, comment, group and symbol. No cap: real archives with more than 1,000 waypoints come out complete.
Routes in the right order
Every route with its name and its points in sequence, checked point by point against 80 routes exported by Raymarine’s own converter.
Tracks, with depth
Track points are converted from the plotter’s Mercator grid to latitude and longitude, to about a meter of Raymarine’s own export, and keep depth and water temperature.
See it before you download
Counts, a table of the waypoints and a simple drawing of tracks, routes and waypoints, so you know it is your boat’s data. No map service is contacted.
Recovers deleted and damaged data
One tick box adds the items the plotter had flagged as deleted. Damaged stretches of a file are skipped and reported, and the rest is read.
Original untouched, nothing uploaded
The archive is only read, on your device. You also get a CSV of the waypoints for a spreadsheet and a KML.
Compared
Three ways to get an ARCHIVE.FSH into GPX.
Raymarine’s own route and the open-source tools both work for the people they fit. WaypointRescue is for doing it today on the computer you have, Mac included.
| Feature | WaypointRescue | Raymarine’s own methods (a LightHouse II display, or its Windows converter) | Open-source tools on GitHub (parsefsh, FSH Editor, fsh2gpx) |
|---|---|---|---|
| What you need | A browser and a card reader | A second Raymarine display with LightHouse II, or a Windows PC | A compiler (parsefsh, C), Python (fsh2gpx) or Windows (FSH Editor) |
| Cost | Free preview and first 25 waypoints, 1 route and 1 track; $9 once for all | Free if you have the display or the PC | Free |
| Works on a Mac | Yes | The display: yes, no computer needed. The converter: Windows | If you build or run them yourself |
| Waypoints, routes, tracks | All three | Not verified by us: check Raymarine’s notes for the method you use | Varies by tool: check each README |
| Preview before converting | Counts, table and drawing | On the display’s own chart | Varies by tool |
| Items flagged as deleted, damaged files | Optional recovery; damaged parts skipped and reported | Not verified by us | Not verified by us |
| Can write back to the old format | No | The display reads and writes its own formats | FSH Editor is described as an editor; not verified by us |
| Files leave your device | Never | Never | Never |
Pricing
See your whole archive free. $9 once to download all of it.
Start free
Free
Check that your file is read and that your new plotter takes the GPX, before paying anything.
Convert my ARCHIVE.FSH- Complete preview and counts of your file
- GPX, CSV and KML with the first 25 waypoints, 1 route and 1 track
- Deleted-item recovery and damage report
- No account
ONE-TIME
WaypointRescue Full
one-time · everything in the file · any number of archives
Unlock everything, $9- Every waypoint, route and track
- GPX, CSV and KML
- Convert your friends’ archives too
- No subscription
FAQ
Questions about converting a Raymarine ARCHIVE.FSH
Want the long version? Read the guide.
Read the guideHow do I convert a Raymarine ARCHIVE.FSH file to GPX?
Take the CompactFlash or microSD card out of the plotter, put it in a card reader and open this page. Choose the file called ARCHIVE.FSH from the card. WaypointRescue reads it in your browser, shows how many waypoints, routes and tracks it holds, draws them, and gives you a GPX file to download. Copy that GPX to your new plotter or app and use its “import GPX” function.
Which Raymarine plotters save an ARCHIVE.FSH?
The older ones: C-Series and E-Series Classic (such as the C80, C120, E80 and E120), A-Series, and the C-Series and E-Series Widescreen. They save waypoints, routes and tracks to the card as one binary file that starts with the text “RL90 FLASH FILE”. WaypointRescue was tested with four real archives that owners posted publicly; the files do not say which model wrote them. Newer displays running LightHouse save GPX already, so they do not need this tool.
Does it convert tracks, or only waypoints and routes?
All three. Waypoints become <wpt>, routes become <rte> with their points in order, and tracks become <trk>. Where the plotter recorded a gap in a track, the track is split into segments, the same way Raymarine’s own GPX export does it. In our test, the 4,013 track points of seven real tracks matched the GPX that a Raymarine display exported from the same boat to within 0.00001 degrees, about one meter.
Is there a 1,000 waypoint limit?
No. There is no cap on waypoints, routes or track points. Two of the real archives we test with hold 1,061 and 1,010 waypoints, and every one of them comes out, with the same position, date, group and symbol as in the GPX made by Raymarine software from the same data.
Does it work on a Mac? On an iPad?
It works on a Mac, on Windows and on Linux, in any current browser, because it is a web page and nothing is installed. It uses only standard browser features, so it should also run in Safari on an iPad when the file is in the Files app, but we tested it on desktop Chrome only.
Is my file uploaded? Who sees my waypoints?
Nobody. The file is read by JavaScript on this page, on your device, and the GPX is built there too. There is no upload step and no account. No map service is called: the preview is a plain drawing made from your coordinates. The only network requests are for the page itself, cookieless page analytics, and the payment check if you buy the full version, which sends a payment ID and never a file.
Does it change my ARCHIVE.FSH?
No. The file is only read. Nothing is written back to the card, so you can keep it as your backup. Still, copy the file to your computer first and work from the copy: an old CompactFlash card is not a safe place for the only copy of fifteen years of waypoints.
What exactly is in the GPX?
A standard GPX 1.1 file. Each waypoint has its name, latitude and longitude, the date and time it was saved (UTC), its comment (as cmt and desc), its symbol name (sym) when the symbol is one we know, and its group name (type). When the plotter stored a depth or a water temperature with the point, they are written in an extensions block, in meters and degrees Celsius. Routes keep the order of their points. Tracks keep their name and their segments. You also get a CSV of the waypoints for a spreadsheet, and a KML for Google Earth.
Will my new Garmin, Simrad, B&G or Raymarine Axiom plotter, Navionics or OpenCPN read it?
GPX is the exchange format these plotters and apps import, and the file follows the GPX 1.1 standard. We have not tried the import on every device, so check the result on yours. Each device has its own limits (name length, number of waypoints, which symbols it knows) and applies them when it imports. If a device wants waypoints, routes and tracks in separate imports, or refuses a large file, write to support@cedanolabs.org.
Are waypoint symbols and groups kept?
Groups: yes, the group name of each waypoint is written into the GPX (type) and the CSV. GPX has no folders, so most apps import one flat list. Symbols: 16 symbol codes are translated to the names Raymarine’s own export uses (Red Cross, Anchor, Rocks, Skull, Sailboat, Buoys and others). Other symbol codes are left out, and the importing device shows its default symbol. Whether a symbol name is understood depends on the device.
Do the track points have times?
No. An ARCHIVE.FSH stores the position of each track point, and often depth and water temperature, but not a time, so the GPX track points have none. Waypoints do have the date and time they were saved.
What are the “items marked as deleted”?
When you delete or edit something, these plotters do not erase it from the archive: they flag the old block and write a new one. WaypointRescue reads the live data by default. If the file also holds flagged blocks, it tells you how many, and one tick box adds them to the output. That is how the waypoints of one of our test archives came back: all of its waypoint groups were flagged, and 492 of the 493 waypoints in the owner’s later GPX export were still in the file. Recovered items can be old versions, so review them.
My archive is damaged. Can it still be read?
Often, in part. The file is a chain of blocks inside 64 KB sectors. When a stretch is unreadable, WaypointRescue skips ahead to the next intact block, reads everything that is whole, and tells you how many kilobytes it had to skip. One of the real test files has about 63 KB like that and still gives back its routes and tracks. What sat inside the damaged stretch is lost.
What does it not read?
Only ARCHIVE.FSH. It does not read .rwf files from RayTech, chart cards, sonar logs, or the GPX files of LightHouse displays (those are already GPX: import them as they are). It does not write ARCHIVE.FSH, so it cannot move data into an old plotter. Track colors and the route data it does not understand are not carried over.
How does the $9 full version work?
Free shows the complete preview and the full counts for your own file, and the downloads hold the first 25 waypoints, 1 route and 1 track, so you can try the import on your new plotter first. The full version is a single $9 payment, with no subscription and no account, and puts every waypoint, route and track in the files, for any number of archives. It unlocks in the browser you pay from.
Is this a Raymarine product?
No. WaypointRescue is an independent tool by Cedano Labs LLC. Not affiliated with Raymarine. Raymarine’s own routes are to load the archive on another Raymarine display running LightHouse II and export it again, or to use its FSH-to-GPX converter for Windows.
Take your waypoints to the new plotter.
Add your ARCHIVE.FSH, check the preview, and download a GPX with your waypoints, routes and tracks. The preview and the first 25 waypoints, 1 route and 1 track are free.